0 € 0,00

Er liggen nog geen producten in je winkelwagen.

IBS Magnetic Solenoid Valve VML (Elektrogas)

IBS Magnetic Solenoid Valve VML

Dubbelklik op de afbeelding voor groot formaat

Uitzoomen
Inzoomen

Meer afbeeldingen

  • IBS Magnetic Solenoid Valve VML

IBS Magnetic Solenoid Valve VML (Elektrogas)

Artikelnummer: HTC-IBS-VML

The VMR type valve is a fast opening single-stage solenoid valve, normally closed (open when energized).


View leaflet

Beschikbaarheid: Levertijd op aanvraag

€ 249,47
€ 249,47

Zekerheden

  • Gratis verzending vanaf €200,-
  • Snelle levering
  • Advies van specialisten
Credit card Visa
Credit card Mastercard
iDeal
Bank Transfer
Productbeschrijving

Details

IBS magnetic solenoid valve, VML type, is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, industrial kilns and others gas consuming appliances.

  • The valves are made of aluminum alloy die-cast, with a wide range for inlet/outlet connections from DN10 (3/8”) up to DN80 (3”).
  • Sealings are made of NBR-based rubber certified for use with gas (EN 549).
  • Suitable for use with air and non-aggressive gases included in the 1, 2 and 3 families (EN 437). Special versions suitable for aggressive gases, free of non-ferrous metals and with FPM seals.
  • Pipe connections meet Group 2 and backpressure sealing is compliant with Class A, according to EN161 requirements.
  • The whole range can be provided in Ex-proof execution, for use in Zones 2 and 22, according to 2014/34/EU Directive (ATEX).
  • The valve is open only when energized: if, for any reason, power supply goes down, the valve closes immediately (intrinsic safe).
  • Suitable for heavy-duty cycle operatio and qualified for continuous service (100% ED).
  • Equipped with max. flow rate and start flow rate adjustment.
  • An incorporated fine mesh filter protects the valve seat and disc as well as downstream components and prevents dirty contamination (except 6 bar models).
  • Provided with G1/8 connection to fit a proof of closure switch or a visual indicator.
  • Provided with 1/4" pressure gauge on two sides in the inlet chamber, to connect manometers, pressure switches, leakage tester or other gas equipments. Flanged models are provided with gauges also in the outlet chamber.
  • The coils are provided with terminal box or with ISO 4400 plug (optional). Both systems are provided with suitable cable gland to avoid water and dirty contamination.
  • All components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical sturdiness, sealing and resistance to corrosion of the components.
  • Valves are 100% tested by computerized testing machineries and are fully warranted.

Functioning

The VML type valve is a safety shutting device using auxiliary power supply. When it is de-energized, the spring pushes on the seal disc, keeping the gas passage closed. Now, the inlet chamber is under the gas line pressure, and it forces on the disc too, improving the seal.

When the coil is powered the valve opens slowly because of the hydraulic brake, against the strength of the spring and gas pressure. The rapid stroke may be adjusted using the regulating screw on the top (see the installation and service instructions), to adjust the initial gas flow. Main flow and opening time can be adjusted also. If the power supply is shut off, the valve rapidly closes, interrupting the gas flow.

For more information, click here to take a look at the product brochure.

Extra informatie

Extra informatie

Fabrikant IBS
Max. werkdruk 200 mbar
Aansluitspanning 230V
Aansluiting Schroefdraad
Verwachte levering 1-2 weken
Land van fabricage Italië
Beoordelingen

Schrijf uw eigen review

U plaatst een review over: IBS Magnetic Solenoid Valve VML (Elektrogas)

Hoe waardeert u dit product? *

  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Quality
Price
Value
CMS tab